TORKO

P0706 Transmission range sensor circuit range/performance

What P0706 means

The transmission control unit receives a gear position signal that is out of range or does not match other inputs. It may not know which gear the driver has selected, so it can restrict shifting.

P0706 is a generic SAE J2012 code: it means the same on every make. The exact cause still depends on the car, so read the freeze-frame data before replacing parts.

At a glance

Severity
Medium
Typical repair cost
120–600 €
Workshop time
0.5–2.5 h
Repair difficulty
Medium
DIY possible
No
Check engine light
Yes
Affects emissions test
No
Limp mode possible
Yes

Parts and labour at an independent workshop in Europe. Main dealers charge more; the cause decides the bill, not the code.

Symptoms

Common causes

  1. Transmission range sensor out of adjustment
  2. Worn or faulty range sensor
  3. Selector cable loose or stretched
  4. Corroded connector or damaged wiring

Can I keep driving with P0706?

You can drive carefully, but have it checked within one to two weeks. Use the handbrake when parked.

What to check first

  1. Check the selector cable and its adjustment
  2. Watch the range sensor values in live data in each position
  3. Inspect the connector for corrosion or fluid
  4. Adjust or replace the range sensor

Related codes

Data: TORKO fault-code catalogue, built on OBDex (CC0-1.0) and reviewed against workshop practice. Informational only — it does not replace a diagnosis by a mechanic.
Updated: