TORKO

U0127 Lost communication with tyre pressure monitor module

What U0127 means

The tyre pressure monitoring module receives signals from the tyre sensors and reports pressures to the instrument cluster. U0127 means other modules stopped receiving its messages. Tyre pressure warnings will not work until it is fixed.

U0127 is a generic SAE J2012 code: it means the same on every make. The exact cause still depends on the car, so read the freeze-frame data before replacing parts.

At a glance

Severity
Medium
Typical repair cost
80–700 €
Workshop time
1–3 h
Repair difficulty
Medium
DIY possible
No
Check engine light
No
Affects emissions test
No

Parts and labour at an independent workshop in Europe. Main dealers charge more; the cause decides the bill, not the code.

Symptoms

Common causes

  1. Blown fuse supplying the TPMS module
  2. Damaged wiring or corroded connector
  3. Low battery voltage
  4. CAN bus wiring fault
  5. Failed TPMS module

Can I keep driving with U0127?

You can drive, but check tyre pressures manually until it is repaired, because the system will not warn you of a puncture. Have it checked within one or two weeks.

What to check first

  1. Check tyre pressures with a gauge
  2. Check the TPMS module fuse and battery voltage
  3. Try to communicate with the module and inspect its connector
  4. Replace or reprogram the module if it does not respond

Related codes

Data: TORKO fault-code catalogue, built on OBDex (CC0-1.0) and reviewed against workshop practice. Informational only — it does not replace a diagnosis by a mechanic.
Updated: